bag ventilation system
EURO, Free Insured Shipping worldwide.
cushion let you ride with a messenger bag without getting your back
your shirt moistened.
used with virtually any messenger bag or cycling backpack. It can be
fixed by two knots to the messenger bag strap.
is made by two half cushions which can be adjusted in position by
lengthening the small rope that connect them. Between the two half
cushions a natural air
scoop is created in a way
that sustained air ventilation happens exactly where it is needed the
most. It is
available in two colours
(black and white).It
is made with 3d
fabric, the same kind of material used in recumbent bicycles
black one is a little bit stiffer then
the white one. This difference in stiffness is normally noticed only by
carrying hard bags or cases, such as a laptop computer case. Those
prefer the white pads even though the white ones need to be washed
several months. Also a strap pad is available (black only), especially
during the hottest months of the year to reduce sweating also in the
area. It weighs about 120g.
The size of an half cushion is about 170mm
270mm long, up to 40mm thick on the sides with the central area being
mostly by PET plastic it
is practically fully recyclable.The 2 half cushions version
is ideal for
medium to large size messenger bags.For
XL bags it is possible to use 3 half cushions and for XXL bags 4 half
connected horizontally instead of vertically.For XS size bags one half
cushion can be
enough. It can be used on
practically any kind of bag. Tie it conveniently to your
bag or rucksack,
simply making sure
that some dynamic air
enters between your back and the bag. Add-on side ventilation scoops
side scoops will
further increase the ventilation, especially for upright riders.
Lug: Meshenger Pad(http://bluelug.com/products/list.php?category_id=252
Royal: Earo Bike Sack (http://www.nishikiroyal.com/original/sack.html
used on practically any kind of bag.
it conveniently to your bag or rucksack, simply making
sure that some dynamic air enters between
your back and the bag. 2)
Use it a
couple of times experimenting on the optimal position and separation
the two half cushions to achieve best results. Evaluate if you need
fixing points or Velcro straps to keep it in place. If your bag is a
one, evaluate if you need additional half cushions to achieve the
Strap Pad Installation.
Tie it conveniently to your bag strap. Tie itkind of tight such as that
the 3d ventilation
material will tend to be wrapped around the bag strap.Doing as such
will reduce the chances of
being picked by the edges of the 3d fabric.
Using the Baghpad needs adjustment and
adaptation work that needs to be taken care by the final user. The
function of the ventilation that every and each user succeed
creating.Bicycle riding and racing
is a dangerous
vendor claims no
responsibility for any damage or accident that might be generated by
activity. Customers are expected to check all parts for proper fit
installation on their own . This sale is final, no return.